●  混合過程溫和、混合均勻度高。內部獨特的揚板、出料板設計確保了在很短的混合時間內對物料提供了溫和的混合運動：跌落、翻轉和交疊的混合運動。

●  混合速度快。物料在三分鐘之內可達到均勻混合；

●  低能耗。混合筒體由重型的“耳軸滾輪”支撐，通過驅動裝置帶動旋轉。這一設計可進行快速、簡便維護，功率消耗比同類混合機降低50%左右。

●  出料徹底。內部揚板與出料板以一定的角度安裝，加上獨特的出料機構可保證出料干凈；

●  密封性好。完全封閉的設計，防止灰塵、有害氣體和物質進入。特殊的密封設計可保證動靜結合處的完全密封；

●  裝載范圍。在裝填系數不大于0.5的情況下，能達到一樣有效的混合；

●  選擇。用戶根據工藝要求可選擇帶夾套或噴淋裝置，從而對物料加熱、冷卻或在物料中噴入適量液體；

●    Gentle mixing process, high mixing evenness. Idiographic design of raise plates and discharge plates ensure that offer gentle mixing action in a short mixing time: tumble, turn and fold.

●    Fast mixing speed. Material can be mixed equality in less than three minutes.

●    Minimal horsepower. The mixing drum is supported with heavy duty \' trunnion  rollers\' that rotate by the drive unit. Its power consumption is less about 50% than the similar mixers.

●    Complete discharge. The interior raise plates and discharge plates are mounted in a stated angle, and the idiographic discharge mechanism can ensure complete discharge.

●    Good sealing. Its totally enclosed design, preventing dust, fumes or hazardous materials from escaping into the environment. Special sealing design can ensure complete sealing in combine place of movement and quiescence.

●    Loading range. Equally efficient mixing at the filling coefficient in less than 0.5.

●    Options. Customer can choose jacket or spraying system according their technological requirements that can heat or cool the materials or add the liquid into the materials.